Q195 Low Carbon Mild Steel Wire Rod 6.5mm
Hot rolled Q195 grade mild steel wire rod for nail making, fastener forming, and general wire manufacturing.
Grade: Q195 (GB/T 701) Low Carbon Mild Steel
Diameter: 6.5mm (range 5.5mm – 12.5mm)
Surface: Bright / Black, Hot Rolled Finish
Send Inquiry
Specification
| WIRE ROD |
|---|
| Material | Q195 (GB/T 701) Low Carbon Mild Steel |
| Standard Diameter | 6.5mm (available range 5.5mm – 12.5mm) |
| Length / Coil Form | Continuous coil, length as per customer requirement |
| Tolerance | ±0.01mm – ±0.05mm |
| Surface Finish | Bright, black (hot rolled with scale) |
| Heat Treatment | As rolled / Annealed / Spheroidized |
| Payment Term | 30% TT Advance + 70% Balance |
| Applicable Standard | ASTM A510 / GB/T 701 |
Chemical Composition (Reference Standard)
Reference values per applicable standard. Mill certificate values available upon request.
| Grade | C % | Mn % | Si % | P % max | S % max |
|---|
| Q195 | 0.06 – 0.12 | 0.25 – 0.50 | 0.30 max | 0.045 | 0.050 |
Product Detail
Q195 low carbon wire rod is a mild steel grade per GB/T 701, selected for applications requiring good formability and consistent mechanical properties. Its balanced carbon and manganese content supports reliable nail-forming and general wire drawing with minimal process adjustments.
Applications
Q195 wire rod serves as the primary material for nail making, general wire drawing and fastener production.
Nail & Fastener Making — Q195 feeds into automatic nail-making machines for common nails, concrete nails, and roofing nails. Its low carbon composition supports cold heading without cracking.
Wire Drawing & Galvanizing — Drawn Q195 wire is suitable for galvanizing to produce gabion mesh, chain-link fencing, barbed wire, and agricultural tying wire.
Welded Wire Fabrication — Q195 drawn wire feeds automatic mesh welding lines for concrete reinforcement panels, industrial grating, and security fencing.
Quality Assurance
With 30 years in steel trading and supporting production lines, we offer consistent Q195 wire rod supply backed by billet sourcing, hot rolling, controlled cooling, and coil compaction capabilities. Pre-production samples and final inspection are standard practice. We support trial orders from 5 tons to full container loads.
FAQ
What is Q195 wire rod mainly used for?
Q195 wire rod is primarily used for nail making, general wire drawing, galvanized wire production, and welded mesh. Its low carbon content provides good formability.
What sizes do you supply in Q195?
We supply Q195 wire rod from 5.5mm to 12.5mm diameter, with 6.5mm being the most common for nail making. Custom sizes available on request.
Can you provide mill certificates with Q195 shipments?
Yes. Mill test certificates with chemical analysis and mechanical properties are provided with every shipment. Third-party inspection is available upon request.
Get a Quotation
Selecting the right Q195 wire rod specification directly affects nail-forming efficiency and final product quality. We supply wire rod that supports consistent production.
