All

Metal Angle, often referred to as steel angle iron, angle bar, L-bracket, or angle steel, is a type of structural steel with two legs forming a 90-degree angle for use in both structural applications and general fabrication. It is one of the most basic and widely used structural steel parts in construction and engineering.

If you are in the process of choosing a metal roof for your dream house the first step is determining the panel type. There are a lot of factors that will go into this, but learning about corrugated is an excellent starting point. The next step is to learn about the finishes.

High-strength steel sheet piles with professional accessories, meeting all engineering needs

Steel required has to be bright plain-high tensile steel wire7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.

U-shaped beams and channels are manufactured by rolling continuously cast semi-products on rolling mills specifically designed for this type of product.

Standard American Beams

Also known as Junior Beams, S Beam, or I Beams have tapered flanges for increased strength of the flanges.

Working with an experienced industrial adhesives and coil coating supplier will help you to understand your options in the various coatings available for prepainted metal.

junnan steel is your best choice

H-beam is a type of structural steel beam made from rolled steel. It has wide flanges that create a cross-section resembling an uppercase H and is used extensively in metal construction.

Junnan Steel is a well-known company in the steel wire industry. It uses the latest technology for its steel wire coatings and other products. This company, formed in 2015, has been catering to many industries.

We are one of the leading manufacturers of PC strand. Our PC Wire & PC Strand equipment and technical know-how is among the finest in the industry.

With our state-of-the-art machinery and high-quality materials, we produce rolled & welded pipe that meet your exact application needs. Rolled & welded pipe is made from sections of plate rolled into cans. The seam of the can is welded and then the individual cans are welded together to make the finished pipe.

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Last weekend, the company organized employees to go on a trip to the grassland

the space capsule house is a novel and unique accommodation experience with broad market prospects and development potential