Full AUTO C Purlin Machine For Solar Industry
Full AUTO C Purlin Machine For Solar Industry

Item specifics

Material Thickness
2.0-4.0mm
Applicable Material
Galvanized Steel(GI),Cold roll steel(CRC)
With Yield Strength
Q235-550Mpa
Lip(E)
10~25mm
Height(H)
25~80±0.5mm
Web(W)
50~200±0.5mm

Review

Description

Work Flow

Decoiler→Feeding And Leveling Device→Hydrualic PunchingPre-Cutting Device→Rolling Forming System→

Hydraulic Post Cutting→Exit Rack

Image


Machine Components


1) 5 Ton Hydraulic Decoiler: one set

Hydraulic Control Steel Coil Inner Bore Shrinkage And StopMax. Feeding Width:600mm Coil ID Range:508±30mm,Outside Diameter:1600mmMax Capacity:5 ton,Motor:3KW,Frequency Speed ControlOil Pump Motor:2.2KW,With Press ArmAdd Automatic Feeding Power And Self-Stop Device

Image


2) Feeding And Leveling Device

 

Up Three Down Four Totally Seven Shafts Leveling Device
With Feeding Material Guide,Body Frame Made From H450 Type Steel
Side Wall Thickness:Q235 t30mm
Shafts Manufactured From GCr15 Steel(=EN31 Steel)

Heat Treatment,HRC 58-62.Diameter=φ105mm


Use Two Electric Motors To AUTO Adjust The Material Feeding Width

Image


Use Eight Air Cylinders AUTO Change The Distance Of Up And Down Shafts

Image


3) Hydraulic Pre-Cutting & Punching Device

Pre-Punching And Pre-Cutting,Use The Same Hydraulic System
Hydraulic Motor:22KW,Hydraulic Pressure Range:0-16Mpa
Punching And Cutting Tool Material:Mold Steel Cr12MoV(=SKD11 steel

With One Million Times cutting Life),Heat Treatment To HRC58-62 Degree
4-cylinders Hole Punching System For Punching Both On Web And Flange

Image


4) Embossing Device


Use Two Electric Motors To AUTO Adjust The Material Feeding Width


Image


5) Main Machine

Body Frame Made From H450 Type Steel By Welding
Side Wall Thickness:Q235 t30mm 
Rollers Manufactured From Cr12 Steel,Heat Treatment,HRC58-62
Shafts Diameter=ф95,Precision Machined
Gear/Sprocket Driving,About 22-step To Form
Main Motor(Polaroid brand)=30KW, Frequency Speed Control


Use Two Electric Motors To AUTO Adjust The Material Feeding Width

Image


Use Two Electric Motors To AUTO Change Size

Image


Arch Structure

Image


6) Post Hydraulic Cutting Device

Post To Cut,Stop To Cutting,Two Pieces Type Of Cutting Blade Design 
Hydraulic Motor:22KW,Cutting Pressure:0-16Mpa

Cutting Tool Material:Cr12MoV(= SKD11 Steel)

With At Least One Million Times Of Cutting Life),Heat Treatment HRC58-62

Image


7)PLC Control System

Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)

On The Touch Screen,It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc


Image


8)Exit Rack:One unit

Un-Powered,With Rollers On It For Easy Movement.

Image


9)Product Show

Image